- 3.2 Gpx/s
- Maximum speed at full resolution of 1920 x 1200 is 1380 fps
- At 1920 x 1080, you can achieve over 1500 fps and at 1152 x 1152, over 2200 fps
- Maximum speed at reduced resolution of 64 x 8 is 325,000 fps (mono camera)
- Minimum frame rate of 24 fps
- Shutter speeds down to 1 microsecond
|
- CMOS sensor
- 1920 x 1200 pixels
- 10 µm pixel size
- 19.2 mm x 12.0 mm
- 12-bit depth
- ISO Monochrome 5,000D; 12,500T
- ISO Color 1,250D; 1,600T
- TE cooled
- CAR in 64 x 8 increments
- Dynamic range: 55 dB
|
- 1 µs minimum exposure
- Global electronic shutter
- Extreme Dynamic Range (EDR)
- Auto Exposure
- Shutter Off mode for PIV applications
|
- 12GB high-speed internal RAM
- CineFlash support (120 GB, 240GB)
|
- 2.3 seconds at maximum frame rate, 12-bit depth, largest resolution, and into maximum internal memory
|
- Segment memory for up to 63 cines in multi-cine mode
- Image-Based Auto-Trigger
- Continuous recording
- Memory gate
- Event marking
- Frame timestamp
- IRIG In (modulated or unmodulated)
- Shutter off mode for PIV exposure
- 1.4µs straddle time (mono)
- Burst mode
- Standard internal mechanical shutter for automatic/remote Current Session Reference (CSR)
- Secondary IP address
- Field-based firmware upgrade capable
|
- Programmable trigger location (pre/post trigger recording)
- Image Based Auto Trigger standard
- Trigger from software
- Hardware trigger on capture cable
|
- 20ns timing accuracy
- Frame synchronization to internal or external clock (FSYNC)
- IRIG In (modulated or unmodulated)
|
- Capture connector (Trigger, IRIG In, Video, IRIG Out, Aux1, Aux2)
- (Aux1 signal can be assigned to FSYNC, Event, Strobe or Memgate)
- (Aux2 signal can be assigned to Ready or Strobe)
- Dedicated FSYNC and Trigger connection on camera body
- In software there is an Aux3 assignment that allows IRIG Out to be reassigned to Strobe
- There is no analog video on this camera, instead there is HD-SDI
|
- Gb Ethernet for control and data
|
- Phantom Camera Control software (PCC)
- Flip-out LCD Touchscreen on LC-Series only
- Remote Control Unit (RCU)
- SDK available
|
- HD-SDI from BNC on rear of camera. Standard 720P, 1080i and 1080psf signals are supported.
|
- The following mounts are available:
- Canon EOS
- Nikon F-mount, support F & G style lenses
- Nikon F mount adapter (allows the use of F-mount lenses on EOS mount)
- 1" C-mount
- PL-mount
|
- Brightness
- Gain
- Gamma
- Saturation
- Hue
- White Balance
- Color interpolation algorithm
- Flare
- Pedestal
- Tone curve
- Filters
- Color matrix
- Image flip and rotate
- Crop
- Scale
|
- Native Support in PCC
- for National Instruments
- X- and M-Series
|
- Basic measurements via Phantom Application:
- Distance
- Speed
- Acceleration
- Angles and Angular Speed
- Manual and Automatic point collection for target tracking
- Compatible with 3rd party solutions
|
- Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX
|
- 12 - 28 VDC, 65 W
- 100 - 240 VAC power supply included
- Rechargeable battery (Sony BP-U30 or BP-U60)
|
- Size: 7.5 x 3.5 x 4 in (19 x 8.8 x 10 cm) without battery
- Weight 3.5 lbs, 1.6 kg without battery or lens
|
- Operational Temperature: -10°C - +50°C
- Operational Shock:
- 100G, sawtooth wave, 11ms, 10 pulses, all axes, no lens, no internal shutter
- 30G rating with internal shutter installed and BP30 battery
|
- Phantom SDK
- LabView
- MatLab
|
- Power supply
- Ethernet cable
- Battery; Sony BP-U30 or BP-U60 rechargeable, external charger required
- 120GB CineFlash and dock
- Mini Break-out-Box
- PCC software
- Printed manual
|
- Upgrade bundled 120GB CineFlash to 240GB
|
- Spare batteries, battery charger
- Additional CineFlash modules
|
