- 3 Gpx/sec
- Max speed at full resolution of 1920 x 1080 is 1480 fps
- Max speed at the minimum resolution of 640x8 is 94,510 fps
- Minimum frame rate at all resolutions is 100 fps.
|
- CMOS Sensor
- 1920 x 1080 pixels
- 10 µm pixel size
- 22.03 mm diagonal
- 10-bit pixel depth
- ISO Monochrome 10,000D
- ISO Color 2,000D
- CAR: 640 x 8
|
- 1 µs minimum exposure
- Auto Exposure
|
- 8GB or 16GB internal RAM, 128GB internal, non-removable CineFlash
|
- 4.4 seconds at maximum frame rate, largest resolution and into maximum internal memory (16GB)
|
- Segment memory for up to 63 cines in multi-cine mode
- Image-Based Auto-Trigger (IBAT)
- HD-SDI
- Continuous recording
- Memory gate
- Event marking
- Frame timestamp ((IRIG SMPTE or MISP)
- IRIG In: C320 - modulated or unmodulated
- IRIG In: C320J - unmodulated
- IRIG Out: C320/C320J -unmodulated
- Burst Mode
- PIV Mode
- Straddle time 1160 ns
- Secondary IP address
- Field-based firmware upgrade capable
|
- Programmable trigger location (pre/post trigger recording)
- Image-Based Auto-Trigger standard
- Trigger from software
- Hardware trigger BNC on MiniBob and Miro Junction Box
|
- 20ns timing accuracy
- Frame synchronization to internal or external clock (FSYNC)
- IRIG In: C320 - modulated or unmodulated
- IRIG In: C320J - unmodulated
- IRIG Out: C320/C320J -unmodulatedIRIG In (modulated or unmodulated)
|
- C320J: System/Camera connector (Trigger, IRIG in, IRIG out, Ready, Aux, Ethernet) (Aux signal can be assigned to Event, Memgate or FSYNC)
- C320: Capture connector (Trigger, IRIG In, IRIG Out, Aux1, Aux2)
- Aux1 signal can be assigned to FSYNC, Event, Strobe or Memgate.
- Aux2 signal can be assigned to Ready or Strobe.
|
- Gb Ethernet for control and data
- C320J: Ethernet is accessed through the system cable.
- C320: Ethernet is accessed through an Ethernet cable with a Fischer connector.
|
- Phantom Camera Control software (PCC)
- Multi-Cam software
- SDK available
|
- HD-SDI available through DIN 1.0 / 2.3 connector on front of the cameras
|
- The C320 and C320J have 1" C-lens mounts that can be reversed to accept CS lenses.
|
- Brightness
- Gain
- Gamma
- Saturation
- Hue
- White Balance
- Color interpolation algorithm
- Flare
- Pedestal
- Tone curve
- Filters
- Color matrix
- Image flip and rotate
- Crop
- Scale
|
- National Instruments M- and X-Series DAQ modules with integrated support in PCC
|
|
Basic measurements via Phantom Application:
- Distance
- Speed
- Acceleration
- Angles and Angular Speed
- Manual and Automatic point collection for target tracking
- Compatible with 3rd party solutions
|
- Cine, Cine Compressed, & Cine RAW
- AVI
- h.264 mp4
- Apple ProRes .mov
- Multipage TIFF
- MXF PAL
- MXF NTSC
- Uncompressed QuickTime
- Windows BMP
- OS/2 BMP
- PCX, TGA, TIFF, LEAD, JPEG
- JTIF, RAW, DNG, DPX
|
|
Camera:
- 16 - 32 VDC, 13 W, 20W during battery charge.
- Rechargeable battery for back-up.
Junction Box:
- 20 - 32 VDC, each camera port accepts 2 AMPS
|
- 2.9 x 2.9 x 3.25 inches, 73 x 73 x 82.5 mm (H x W x D)
- without lens or lens mount. Weight: 1.2 lbs, 0.54 kg (without lens)
|
- Operating Temperature: 0°C - 50°C
- Storage Temperature: -20°C to +70°C
- Shock:170G IAW MIL-STD 202G (without lenses)
- Vibration: 24 Grms, IAW MIL-STD 202G (without lenses)
|
- Phantom SDK
- LabView
- MatLab
|
- All cables purchased separately
- Software included with Junction Box.
Junction Box:
- PCC software
- Non-sensing power pigtail
- DIN 1.0/2.3 cable
|
|
|
- DIN 1.0 / 2.3 cable
- Miro Junction Box
- Ruggedized Ethernet
- Control Breakout Box
- 280W Power supply for Miro Junction Box
|
