- 1.2 Gpx/second
- Maximum speed at full resolution of 1280 x 1024 is 915 fps. Maximum speed at reduced resolution of 128 x 8 is 52,445 fps. Minimum frame rate at all resolutions is 50 fps.
|
- 2/3" CMOS sensor
- 1280 x 1024 pixels
- 5.6 µm pixel size
- 9.18 mm diagonal
- 12-bit depth
- ISO Monochrome 2,500D; 5,000T
- Color 640D; 640T adjustable
|
- 5 µs minimum exposure
- Auto Exposure
|
|
- 4.4 seconds at maximum frame rate, 12-bit depth, largest resolution and into maximum internal memory (8GB)
|
- Segment memory for up to 63 cines in multi-cine mode
- Image-Based Auto-Trigger
- Continuous recording
- Memory gate
- Event marking
- Frame timestamp
- Quiet Fans
- Secondary IP address
- Field-based firmware upgrade capable
|
- Programmable trigger location (pre/post trigger recording)
- Image-Based Auto-Trigger standard
- Trigger from software
- Hardware trigger BNC
|
- 20ns timing accuracy
- Frame synchronization to internal or external clock (FSYNC)
|
- Individuals BNC for Trigger, and two programmable BNC ports:
- AUX 1 default setting: FSYNC
- AUX 2 default setting: Strobe
|
- Gb Ethernet for control and data, using standard Ethernet connection
|
- Phantom Camera Control software (PCC)
- SDK available
|
- SDI available through BNC on the back of the camera
|
- 1" C-lens mounts, reversable to accept CS lenses.
|
- Brightness
- Gain
- Gamma
- Saturation
- Hue
- White Balance
- Color interpolation algorithm
- Flare
- Pedestal
- Tone curve
- Filters
- Color matrix
- Image flip and rotate
- Crop
- Scale
|
- National Instruments M- and X-Series DAQ modules with integrated support in PCC
|
- Basic measurements via Phantom Application:
- Distance
- Speed
- Acceleration
- Angles and Angular Speed
- Manual and Automatic point collection for target tracking
- Compatible with 3rd party solutions
|
- Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX
|
- 16 - 28 VDC, 12 W
- 65 Watt 100 - 240 VAC power supply included
|
- 2.9 x 3.65 x 3.25 inches, 73 x 93 x 82.5 mm (H x W x D)
- Weight: 1.2 lbs, 0.54 kg
|
- Operating Temperature: 0°C - 50°C
- Storage Temperature: -20°C to +70°C
|
- Phantom SDK
- LabView
- MatLab
|
- Power supply
- Ethernet cable
- BNC cable
- Phantom PCC software
- Getting Started Guide
|
|
- Nothing - you're all set to go!
|