- 2.3 Gpx/s Maximum speed at full resolution of 1280 x 1024 is 1,800 fps. Maximum speed at reduced resolution of 64 x 8 is 67,140 fps. Minimum frame rate at all resolutions is 100 fps.
|
- CMOS sensor
- 1280 x 1024 pixels
- 5.6 µm pixel size
- 9.18 mm diagonal
- 12-bit depth
- ISO Monochrome 2,500D; 5,000T
- Color 640D; 640T adjustable
|
- 5 µs minimum exposure
- Auto Exposure
|
- 8GB or 16GB internal RAM, 128GB internal, non-removable CineFlash
|
- 4.2 seconds at maximum frame rate, 12-bit depth, largest resolution and into maximum internal memory (16GB)
|
- Segment memory for up to 63 cines in multi-cine mode
- Image-Based Auto-Trigger
- Continuous recording
- Memory gate
- Event marking
- Frame timestamp
- IRIG In (modulated or unmodulated)
- IRIG Out (unmodulated)
- Secondary IP address
- Field-based firmware upgrade capable
|
- Programmable trigger location (pre/post trigger recording)
- Image-Based Auto-Trigger standard
- Trigger from software
- Hardware trigger BNC on MiniBob and Miro Junction Box
|
- 20ns timing accuracy
- Frame synchronization to internal or external clock (FSYNC)
- IRIG In (modulated or unmodulated)
- IRIG Out (unmodulated)
|
- System/Camera connector (Trigger, IRIG in, IRIG out, Ready, Aux, Ethernet) (Aux signal can be assigned to Event, Memgate or FSYNC)
|
- Gb Ethernet for control and data. Ethernet is accessed through the system cable.
|
- Phantom Camera Control software (PCC)
- Multi-Cam software
- Remote Control Unit (RCU): Both C210J and C210 have "remote" connectors to connect to an RCU
- SDK available
|
- HD-SDI available through DIN 1.0 / 2.3 connector on front of the cameras
|
- The C210 and C210J have 1" C-lens mounts that can be reversed to accept CS lenses.
|
- Brightness
- Gain
- Gamma
- Saturation
- Hue
- White Balance
- Color interpolation algorithm
- Flare
- Pedestal
- Tone curve
- Filters
- Color matrix
- Image flip and rotate
- Crop
- Scale
|
- National Instruments M- and X-Series DAQ modules with integrated support in PCC
|
- Basic measurements via Phantom Application:
- Distance
- Speed
- Acceleration
- Angles and Angular Speed
- Manual and Automatic point collection for target tracking
- Compatible with 3rd party solutions
|
- Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX
|
- Camera: 16 - 32 VDC, 12 W, 18W during battery charge.
- Rechargeable battery for back-up.
- Junction Box: 20 - 32 VDC, each camera port accepts 2 AMPS
|
- 2.9 x 3.1 x 3.25 inches, 73 x 79 x 82.5 mm (H x W x D) without lens or lens mount. Weight: 1.2 lbs, 0.54 kg (without lens)
|
- Operating Temperature: 0°C - 50°C
- Storage Temperature: -20°C to +70°C
- Shock:170G IAW MIL-STD 202G (without lenses)
- Vibration: 24 Grms, IAW MIL-STD 202G (without lenses)
|
- Phantom SDK
- LabView
- MatLab
|
- All cables purchased separately, Software included with Junction Box.
- Junction Box:
- PCC software
- Non-sensing power pigtail
- DIN 1.0/2.3 cable
|
|
|
- Remote Control Unit
- DIN 1.0 / 2.3 cable
- Miro Junction Box
- Ruggedized Ethernet
- Control Breakout Box
- 280W Power supply for Miro Junction Box
|
