- 18 Gpx/second
- Max speed at full resolution of 2048 x 1952 is 4,510 fps.
- Max speed at full resolution of 1024 x 976 in the Binned mode is 19,530 fps
- Minimum frame rate is 100 fps (Standard, HS, and Binned modes)
- Minimum frame rate is 1,000 fps (Bright Field mode)
|
- CMOS Sensor
- 2048 x 1952 pixels
- 13.5 µm pixel size
- 27 µm pixel size - Binned Modes
- 27.6 mm x 26.3 mm
- 12-bit depth
- TE and heat pipe cooled
- CAR in 128 x 8 increments,
- 128 x 16 in Binned modes
- Standard Mode:
- Mono
- ISO 16,000D,
- E.I. range 16,000-80,000D
- Color
- ISO 3,200D,
- E.I. range 3,200-16,000D
- High Speed Mode:
- Mono
- ISO 12,500D,
- E.I. range 12,500-62,500D
- Color
- ISO 3,200D,
- E.I. range 3,200-16,000D
- High Speed Bright Field Mode:
- Mono
- ISO 2,500D,
- E.I. range 2,500-12,500D
- Color
- ISO 500D,
- E.I. range 500-2,500D
- Standard Binned Mode:
- Mono
- ISO 25,000D,
- E.I. range 25,000-125,000D
- Color
- ISO 5,000D
- E.I. range 500 - 2,500D
- High Speed Binned Mode:
- Mono
- ISO 25,000D,
- E.I. range 25,000-125,000D
- Color
- ISO 5,000D
- E.I. range 5,000 - 25,000D
|
- 1 µs minimum exposure standard, 499ns minimum exposure in Standard mode and 142ns minimum exposure in HS mode with FAST option (export controlled)
- Global electronic shutter
- Auto Exposure
- Shutter Off mode for PIV
|
- 72 GB, 144 GB, 288 GB high-speed internal RAM
- CineMag IV and V for non-volatile storage (up to 8TB)
|
- 10.6 seconds at maximum frame rate, 12 bits, 2048 x 1952 resolution and into maximum internal memory
- Longer record times are available when recording directly to a CineMag at lower frame rates
|
- 10Gb Ethernet standard
- Segment memory for up to 63 cines in multi-cine mode
- Continuous recording
- Memory gate
- Event marking
- Frame timestamp
- IRIG In (modulated and unmodulated)
- IRIG Out (unmodulated)
- Sync-to-Trigger
- GPS input for GPS timing, latitude & longitude
- Shutter off mode for PIV exposure
- 490 ns straddle time - Standard and Standard Binned modes,
- 696 ns straddle time - HS, HS Bright Field and HS binned modes
- Burst mode
- Internal mechanical shutter for automatic/remote Current Session Reference (CSR)
- Secondary IP address
- Field-based firmware upgrade capable
|
- Programmable trigger location (pre/post trigger recording)
- Image-Based Auto-Trigger standard
- Trigger from software
- Hardware trigger BNC
|
- 11.36ns timing accuracy
- Frame synchronization to internal or external clock (FSYNC)
- IRIG in/out
- Ready output (high when camera is armed and ready to record)
- Strobe output (low during frame exposure time)
|
- Programmable I/O ports includes adjustable (assign and define) signals including F-sync, strobe, event, trigger output, ready and more
- FSYNC, Trigger, Timecode In, Timecode Out, and Strobe BNCs on camera body
- Range Data input on camera body
- Remote port
- GPS input for GPS timing, longitude & latitude
- Capture connector (Available signals: Event, Trigger, Strobe, Ready, IRIG In, IRIG Out, Video Out, Serial Port, Power Out, A-Sync (IBAT Trigger), Pretrigger/Memgate)
- Break-out-Box compatible (IRIG-in, IRIG-out, NTSC/PAL Video, Trigger, Event, Strobe, A-Sync, Pre-Trigger/Memgate, Ready) Note: cannot power the camera from the BoB
|
- 1Gb Ethernet and 10Gb Ethernet for both control and data
|
- Phantom Camera Control software (PCC)
- On-Camera Controls standard
- Remote Control Unit (RCU)
- SDK available
|
- Analog video (NTSC or PAL) available on Break-out-Box
- Two HD-SDI ports on camera
- Component viewfinder port
|
- Nikon F-mount standard, supports F & G style lenses
- Canon EOS mount optional
- C-mount optional
- (lens not included)
|
- Brightness
- Gain
- Gamma
- Saturation
- Hue
- White Balance
- Color interpolation algorithm
- Flare
- Pedestal
- Tone curve
- Filters
- Color matrix
- Image flip and rotate
- Crop
- Scale
|
- National Instruments M- and X-Series DAQ modules with integrated support in PCC
|
- Basic measurements via Phantom Application:
- Distance
- Speed
- Acceleration
- Angles and Angular Speed
- Manual and Automatic point collection for target tracking
- Compatible with 3rd party solutions
|
- Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX
|
- 100 - 240 VAC, 280 Watt power supply included
- 20 - 28 VDC backup battery input on camera back panel
|
- 11 x 7.5 x 7.43 inches, 28 x 19 x 18.88 cm (L, W, H) without handle or lens. Handle adds 2.24"(5.7 cm) to height.
- Weight: 17 lbs, 8 oz, 8.1 kg
|
- Operating Temperature: -10 to +50 C
- 10G Operating Temp: +5 - +50 C
- Storage Temperature: -20 to + 70 C
- Humidity: 95% non-condensing
- Altitude:
- Operational: 0 to 10 k feet above sea level
- Non-Operational: -500 to 50 k feet above sea level
- Regulatory(EMI/EMC/ESD):
- Emissions: EN 61326-1, FCC part 15
- Immunity: EN 61326-1
- Random Vibration:
- Operational:7.5 Grms, 3axes, IAW MIL-STD-202G.
- Shock:
- Operational: 5.5G, 11mSec sawtooth, 3 axes,60 pulses total.
- Non-Operational: 30G, 11mSec sawtooth, 3 axes,60 pulses total.
- Safety: IEC 60950
|
- Power supply
- Fischer Ethernet cable
- 10G Ethernet cable
- Phantom PCC software
- Getting Started Guide
|
- FAST Option
- Canon EOS lens mount
- PL-mount
|
- CineMag IV / V
- CineStation for CineMag IV / V
- Video monitor for use with on-camera controls
|