- 26 Gpx/second
- Max speed at full resolution of 2048 x 1952 is 6,600 fps.
- Minimum frame rate is 100 fps
|
- CMOS Sensor
- 2048 x 1952 pixels
- 13.5 µm pixel size
- 27.6 mm x 26.3 mm;
- Super-35mm wide; 38.2mm diagonal
- 12-bit depth
- TE and heat pipe cooled
- CAR in 128 x 8 increments,
- Standard Mode:
- ISO Color 3,200D,
- E.I. range 3,200-16,000D;
- High Speed Mode:
- ISO Color 3,200D,
- E.I. range 3,200-16,000D
|
- 1 µs minimum exposure standard,
- 499ns min. exp. in Standard
- 142ns min. exp. in HS with FAST option
- Global electronic shutter
- Auto Exposure
- Shutter Off mode for PIV
|
- 144 GB standard RAM
- 288 GB optional RAM.
- CineMag IV and V for non-volatile storage (up to 8TB)
|
- 3.9 seconds at max fps, 12 bits, 2048 x 1952 resolution and into 144GB RAM.
- Longer times available when recording directly to a CineMag at lower frame rates
|
- 10Gb Ethernet standard
- Segment memory up to 63 times
- Continuous recording
- Memory gate
- Event marking
- Frame timestamp
- IRIG In (modulated and unmodulated)
- IRIG Out (unmodulated)
- Sync-to-Trigger
- GPS input for timing and latitude & longitude
- Shutter off mode for PIV exposure
- 490 ns straddle time - Standard Modes
- 696 ns straddle time - HS Modes
- Burst mode
- Internal mechanical shutter for automatic/remote Current Session Reference (CSR)
- Secondary IP address
|
- Programmable trigger location (pre/post trigger recording)
- Image-Based Auto-Trigger
- Trigger from software, on-camera controls, or hardware trigger BNC
|
- 11.36ns timing accuracy
- Frame synchronization to internal or external clock (FSYNC)
- IRIG in/out
- Ready output (signals ready to record)
- Strobe output (low during frame exposure time)
|
- Programmable I/O ports includes:
- adjustable (assign and define) signals
- F-sync
- Strobe
- Event
- trigger output
- ready and more
- Dedicated FSYNC, Trigger, Timecode In, Timecode Out, and Strobe BNCs on camera body
- Range Data input on camera body
- Remote port
- GPS input for timing, longitude & latitude
- Capture connector, Available signals:
- Event, Trigger, Strobe, Ready
- IRIG In & IRIG Out
- Video Out
- Serial Port
- Power Out
- A-Sync (IBAT Trigger)
- Pretrigger/Memgate)
|
- Gb Ethernet 10Gb Ethernet for both control and data
|
- Phantom Camera Control software (PCC)
- On-Camera Controls standard
- SDK available
|
- Two HD-SDI BNC ports on camera.
- Component viewfinder port.
- Supports up to 1080p30.
|
- PL-mount standard
- Canon EOS mount optional
- Nikon-mount optional,
- Supports F & G style lenses.
- (lens not included)
|
- Brightness
- Gain
- Gamma
- Saturation
- Hue
- White Balance
- Color interpolation algorithm
- Flare
- Pedestal
- Tone curve
- Filters
- Color matrix
- Image flip and rotate in PCC
- Crop
- Scale
|
- National Instruments M- and X-Series
- DAQ modules with integrated support in PCC
|
- Basic measurements via Phantom Application:
- Distance
- Speed
- Acceleration
- Angles and Angular Speed
- Manual and Automatic point collection for target tracking
- Compatible with 3rd party solutions
|
- Cine, Cine Compressed, Cine RAW
- AVI, h.264 mp4
- Apple ProRes .mov
- Multipage TIFF, MXF PAL, MXF NTSC
- Uncompressed QuickTime
- Windows BMP
- OS/2 BMP
- PCX, TGA, TIFF
- LEAD, JPEG, JTIF
- RAW, DNG, DPX
|
- 100 - 240 VAC, 280 Watt power supply included
- 20 - 28 VDC backup battery input on camera back panel
|
- Without Handle:
- 11 x 7.5 x 7.43 inches (L,W,H)
- 28 x 19 x 18.88 cm (L,W,H)
- Handle adds 2.24"(5.7 cm) to height.
- Weight: 17 lbs, 8 oz, 8.1 kg
|
- Operating Temperature:
- o-10 to +50 C
- 10G Operating Temp: +5 - +50 C
- Storage Temperature: -20 to + 70 C
- Humidity: 95% non-condensing
- Altitude:
- Operational: 0 to 10 k feet above sea level
- Non-Operational: -500 to 50 k feet above sea level
- Regulatory(EMI/EMC/ESD):
- Emissions:EN 61326-1, FCC part 15
- Immunity: EN 61326-1
- Random Vibration:
- Operational:7.5 Grms, 3axes, IAW MIL-STD-202G.
- Shock:
- Operational: 5.5G, 11mSec sawtooth, 3 axes,60 pulses total.
- Non-Operational: 30G, 11mSec sawtooth, 3 axes,60 pulses total.
- Safety: IEC 60950
|
- Phantom SDK
- LabView
- MatLab
|
- Power supply
- Fischer Ethernet cable
- Phantom PCC software
- Printed Manual
- Ships in Pelican Case
|
- Canon EOS lens mount
- F-mount
|
- CineMag V
- CineStation IV
- Video monitor for use with on-camera controls
|