- 3 Gpx/second
- Max speed at full resolution of 2560 x 1600 is 800 fps
- Max speed at reduced resolution of 128 x 4 is 280,000 fps
- Minimum frame rate of 24 fps
|
- CMOS sensor
- 2560 x 1600 pixels
- 10 µm pixel size
- 25.6 mm x 16.0 mm
- 12-bit depth
- ISO
- Mono 6,400 D
- Color 1,250 D
- E.I range:
- 1,250 - 6,400 (color)
- 6,400 - 32,000 (mono)
- TE cooled
- CAR in 128 x 4 increments
|
- 1 µs minimum exposure
- Global electronic shutter
- Exposure Index (E.I.) for controlling apparent ISO
- Extreme Dynamic Range (EDR)
- Auto Exposure
- Shutter Off mode for PIV
|
- 18 GB, 36 GB high-speed internal RAM
|
- 7.5 seconds at maximum frame rate, largest resolution and into maximum internal memory
|
- Segment memory for up to 63 cines in multi-cine mode
- Continuous recording
- Programmable I/O
- HD-SDI and HDMI video
- Event marking
- Frame timestamp (IRIG SMPTE or MISP)
- IRIG in/out (modulated and unmodulated)
- Shutter off mode for PIV exposure
- 1.71 μs straddle time
- Standard Internal mechanical shutter for automatic/remote Current Session Reference (CSR)
- Image-Based Auto-Trigger (IBAT)
- One 12 VDC, 6W auxiliary power port
- Secondary IP address
- Field-based firmware upgrades
|
- Programmable trigger location (pre/post trigger recording)
- Image-Based Auto-Trigger
- Trigger from software
- Hardware trigger BNC
|
- 20 ns timing accuracy
- Frame synchronization to internal or external clock (FSYNC)
- IRIG in/out (modulated or unmodulated)
|
- Dedicated Trigger and Timecode In BNCs on camera body
- Programmable I/O ports includes adjustable (assign and define) signals including F-sync, strobe, event, trigger output, ready and more
|
- Gb Ethernet for control and data downloads.
- Standard RJ45 port.
|
- Phantom Camera Control (PCC)
- SDK available
|
- 3G HD-SDI and HDMI on all VEO models.
- Supports up to 1080p60.
|
- Nikon F-mount standard, supports F & G style lenses
- Canon EOS mount optional
- PL-mount optional
- C-mount optional
- (lens not included)
|
- Brightness
- Gain
- Gamma
- Saturation
- White Balance
- Pedestal
- Tone curve
- Filters
- Color matrix
- Image flip and rotate
- Crop
- Scale
|
- National Instruments M- and X-Series DAQ modules with integrated support in PCC
|
- Basic measurements via Phantom Application:
- Distance
- Speed
- Acceleration
- Angles and Angular Speed
- Manual and Automatic point collection for target tracking
- Compatible with 3rd party solutions
|
- Cine RAW & Cine Compressed
- AVI
- h.264 mp4
- Apple ProRes .mov
- Multipage TIFF
- MXF PAL & MXF NTSC
- Uncompressed QuickTime
- Windows BMP
- LEAD
- JPEG
- JTIF
- RAW
- DNG
- DPX
|
- 100 - 240 VAC, 16-32 VDC via primary power input.
- 80 Watt 24V power supply included
|
- Size (without lens):5 x 5 x 4.4" (127 x 127 x 111 mm) (L x W x H);
- Weight: 4 lbs (1.8 Kg)
|
- Operating Temperature: -10°C - 50°C
- Shock:MIL-STD-202G Method 213-B. Rated
- 30G with shutter;
- 100G without shutter;
- sawtooth wave, 11ms, +/- 10 pulses all axes(60 total)
- Vibration: Rated 12Grms; Figure 2A-1, Test Condition D,15 min per axis(without lenses)
|
- Phantom SDK
- LabView
- MatLab
|
- Power supply
- Ethernet cable
- SDI DIN Cable
- Phantom PCC software
- Getting Started Guide
|
- Canon EOS lens mount
- PL-mount
- C-mount
|
|