- 250 Gpx/second
- Max speed at full resolution of 768 x 600 is 560 fps, maximum speed at reduced resolution of 128 x 32 is 9,055 fps.
- Min frame rate of 30 fps.
|
- CMOS Sensor
- 768 x 600 pixels
- 10-bit
- 4.8 x 4.8 um pixel size
- 4.8 mm diagonal (4.68 mm diag)
- ISO - Monochrome 2,000D; 4,000T
- ISO - Color 400D; 400T
|
- 30 µs minimum exposure
- Extreme Dynamic Range (EDR)
|
- 8GB internal RAM, 128GB internal, non-removable CineFlash
|
- 21 seconds at maximum frame rate, 10-bit depth, largest resolution and into maximum internal memory
|
- Segment memory for up to 63 cines in multi-cine mode
- Continuous recording
- Memory gate
- Event marking
- Frame timestamp
- IRIG In (modulated or unmodulated)
- IRIG Out (unmodulated)
- Image-Based Auto-Trigger (IBAT)
- Strobe
- HD-SDI Video
- Secondary IP address
- Field-based firmware upgrade capable
|
- Programmable trigger location (pre/post trigger recording)
- Image-Based Auto-Trigger standard
- Trigger from software
- Hardware trigger BNC on Miro Junction Box
|
- Frame synchronization to internal or external clock (FSYNC)
- IRIG In (modulated or unmodulated)
- IRIG Out (unmodulated)
|
- System/Camera connector (Trigger, IRIG in, IRIG out, Ready, Aux, Ethernet) (Aux signal can be assigned to Event, Memgate or FSYNC)
|
- Gb Ethernet for control and data. Ethernet is accessed through the system cable.
|
- Phantom Camera Control software (PCC)
- SDK available
|
- HD-SDI available through BNC connector on the base
|
|
|
- Brightness
- Gain
- Gamma
- Saturation
- Hue
- White Balance
- Color interpolation algorithm
- Flare
- Pedestal
- Tone curve
- Filters
- Color matrix
- Image flip and rotate
- Crop
- Scale
|
- National Instruments M- and X-Series DAQ modules with integrated support in PCC
|
- Basic measurements via Phantom Application:
- Distance
- Speed
- Acceleration
- Angles and Angular Speed
- Manual and Automatic point collection for target tracking
- Compatible with 3rd party solutions
|
- Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX
|
- N5 Camera head: 16 - 32 VDC, 2.5 W, typical
- BASE: 16 - 32 VDC, 10 W typical, 18W during battery charge.
- Rechargeable battery in Base for back-up.
|
- N5 Camera head: 32 x 32 x 28 mm (H x W x D) without lens, Weight: 0.2lb, 0.09kg
- Base: 187 x 53 ½ x 75 mm (L x W x H), with Miro Jbox bolting pattern, Weight: 1.4lb, 0.64kg
|
- Miro N5 Head: Operating Temperature: 0°C - 50°C
- Storage Temperature: -20°C to +70°C
- Shock:150G IAW MIL-STD 202G (without lens)
- Miro N-JB Base: Operating Temperature: 0°C - 50°C
- Storage Temperature: -20°C to +70°C
- Shock:170G IAW MIL-STD 202G
- Vibe: 20.7Grms IAW MIL-STD 202G
|
- Phantom SDK
- LabView
- MatLab
|
- 6MM S-mount lens
- Hex-L key
- Locking Ring
- Mounting Bracket
- PCC software
- Getting Started Guide
- Cables and Power supply purchased separately with Miro Junction Box
|
