- 13 Gpx/sec
- Max speed at full resolution of 1280 x 960 is 10860 fps
- Max speed at reduced resolution of 160x24 is 316,900 (standard) and 423,300 fps (binned mode, mono output only)
- Minimum frame rate of 50 fps
|
- CMOS sensor
- 1280 x 960 pixels
- 18 µm pixel size
- 23 mm x 17.3 mm
- 12-bit depth
- Sensor incorporates correlated double sampling (CDS)
- ISO Monochrome 25,000 D Standard, 50,000 D Binned mode
- ISO Color 6,400 D Standard, 8,000 D Binned mode (mono output in binned mode)
- E.I range 6,400 - 32,000 (color); 25,000 - 125,000 (mono)
- CAR in 640 x 12 increments
|
- 1 µs minimum exposure standard, 706 ns minimum exposure with FAST option (export controlled)
- Global electronic shutter
- Exposure Index (E.I.) for controlling apparent ISO
- Auto Exposure
- Shutter Off mode for PIV
- Some features are export controlled
|
- 18 GB, 36 GB, 72 GB high-speed internal RAM
- On-board removable CFast 2.0 cards (S-models) up to 512GB
|
- 3.7 seconds at maximum frame rate, largest resolution, and into maximum internal memory
|
- 10Gb Ethernet (optional)
- Binned mode for higher fps and ISO at 640x480 and below, mono output only
- Segment memory for up to 63 cines in multi-cine mode
- Continuous recording
- Programmable I/O
- HD-SDI and HDMI video
- Event marking
- Frame timestamp (IRIG SMPTE or MISP)
- IRIG in/out (modulated and unmodulated)
- Shutter off mode for PIV exposure
- 726 ns straddle time
- Standard Internal mechanical shutter for automatic/remote Current Session Reference (CSR)
- Image-Based Auto-Trigger (IBAT)
- One 12 VDC, 6W auxiliary power port
- Secondary IP address with DHCP Support
- Field-based firmware upgrades
|
- Programmable trigger location (pre/post trigger recording)
- Image-Based Auto-Trigger
- Trigger from software
- Trigger from on-camera controls (S-model)
- Hardware trigger BNC
|
- 20 ns timing accuracy
- Frame synchronization to internal or external clock (FSYNC)
- IRIG in/out (modulated or unmodulated)
|
- Dedicated Trigger and Timecode In BNCs on camera body
- Range Data input on S-model camera body (Fischer)
- Programmable I/O ports includes adjustable (assign and define) signals including F-sync, strobe, event, trigger output, ready and moreobe, event, trigger output, ready and more
|
- Gb Ethernet (standard)
- 10Gb Ethernet (optional)
- For control and data downloads:
- Fischer port on S-models
- RJ45 port on L-models
|
- On-Camera Controls (OCC) on S-model camera
- Phantom Camera Control (PCC)
- SDK available
|
- 3G HD-SDI and HDMI on all VEO models
- Additional 3G HD-SDI BNC port on back of S-model
- Supports up to 1080p60
|
- Nikon F-mount standard, supports F & G style lenses
- Canon EOS mount optional
- PL-mount optional
- C-mount optional
- (lens not included)
|
- Brightness
- Gain
- Gamma
- Saturation
- White Balance
- Pedestal
- Tone curve
- Filters
- Color matrix
- Image flip and rotate
- Crop
- Scale
|
- National Instruments M- and X-Series DAQ modules with integrated support in PCC
|
- Basic measurements via Phantom Application:
- Distance
- Speed
- Acceleration
- Angles and Angular Speed
- Manual and Automatic point collection for target tracking
- Compatible with 3rd party solutions
|
- Cine RAW & Cine Compressed
- AVI, h.264 mp4
- Apple ProRes .mov
- Multipage TIFF
- MXF PAL & MXF NTSC
- Uncompressed QuickTime
- Windows BMP
- OS/2 BMP, PCX, TGA
- TIFF, LEAD, JPEG
- JTIF, RAW, DNG, DPX
|
- 100 - 240 VAC, 16-32 VDC via primary power input
- 80 Watt 24V power supply included
- Secondary power input, down to 12V via capture port on S-model cameras
|
- Size (without lens): 5.0 x 5.0 x 5.0 inches (L x W x H); 12.7 x 12.7 x 12.7 cm (L-model)
- Weight: 6 lbs (2.7 kg) (L-model); 6.6 lbs (3.0 kg) (S-model)
|
- Operating Temperature: -10°C - +50°C
- Storage Temperature: -20°C - +70°C
- Shock:MIL-STD-202G Method 213-B. Rated 30G with shutter; 100G without shutter; sawtooth wave, 11ms, +/- 10 pulses all axes (60 total)
- Vibration: Rated 12Grms; Figure 2A-1, Test Condition D, 15 min per axis (without lenses)
|
- Phantom SDK
- LabView
- MatLab
|
- Power supply
- Ethernet cable
- SDI DIN Cable
- Phantom PCC software
- Getting Started Guide
|
- Canon EOS lens mount
- PL-mount
- C-mount
|
- Handle
- Cheese Plate
- Battery mounts (S-models)
- Case with custom foam
|
